25. Відділ фізико-хімії і технології тугоплавких оксидів
Постійне посилання на фондhttps://archive.ipms.kyiv.ua/handle/123456789/74
Переглянути
2 результатів
Результати пошуку
Документ THERMAL BARRIER COATINGS BASED ON ZrO2 SOLID SOLUTIONS(Springer Science and Business Media LLC, 2020) E.V. Dudnik; S.N. Lakiza; I.N. Hrechanyuk; A.K. Ruban; V.P. Redko; I.O. Marek; V.B. Shmibelsky; A.A. Makudera; N.I. HrechanyukThe standard material of the ceramic layer in thermal barrier coatings (TBCs)—a solid solution of ZrO2 stabilized with (6–8 wt.%) Y2O3 (YSZ)—approaches the temperature limit of its application (<1200°C) because the ZrO2 t phase sinters and undergoes t-ZrO2 T-ZrO2 + F-ZrO2 phase transformations to form M-ZrO2 at elevated temperatures. Ceramic materials for a new generation of TBCs need to be developed to increase the operating temperature (up to 1600°C), efficiency, and productivity of gas-turbine engines. The overview paper analyzes research efforts focusing on the development of TBCs using solid solutions of ZrO2 with rare-earth metal and titanium oxides. When Y2O3 in YSZ is partially substituted by CeO2, TiO2, La2O3, Sc2O3, Gd2O3, Nd2O3, Yb2O3, Er2O3, and Ta2O5, ceramics with high phase stability (ZrO2 t phase being retained in the coating) up to 1500°C, lower thermal conductivity, and required fracture toughness and sintering resistance but shorter thermal fatigue life than that of standard YSZ are produced. The concepts of greater tetragonality of the ZrO2 t phase (ceramics in the ZrO2–CeO2–TiO2 system) and a 'multicomponent defective cluster' (ceramics in the ZrO2–Y2O3–Nd2O3 (Gd2O3, Sm2O3)–Yb2O3 (Sc2O3) system) explain how the operating temperature of the TBC ceramic layer increases to 1350oC and 1600oC, respectively. The thermal conductivity of TBC ceramics in the binary ZrO2–CeO2, ZrO2–Er2O3, ZrO2–Sm2O3, ZrO2–Nd2O3, ZrO2–Gd2O3, ZrO2–Dy2O3, and ZrO2–Yb2O3 systems is lower than that of YSZ. Ceramics with high phase stability and low thermal conductivity have been produced in the ternary ZrO2–Sc2O3–Gd2O3, ZrO2–CeO2–Gd2O3, ZrO2–YbO1.5–TaO2.5, and ZrO2–Yb2O3–TiO2 systems. An integrated approach is needed to choose the composition of the ceramic layer based on the ZrO2 solid solution, select the coating technique, and improve the coating architecture to design effective TBCs with balanced properties.Документ THERMAL BARRIER COATINGS: CURRENT STATUS, SEARCH, AND ANALYSIS(1068-1302/18/0102-0082 2018 Springer Science+Business Media, LLC, 2018) S. M. Lakiza; M. I. Grechanyuk; O. K. Ruban; V. P. Redko; M. S. Glabay; O. B. Myloserdov; O. V. Dudnik; S. V. ProkhorenkoThe principles for selecting materials to be used as thermal barrier coatings (TBCs) are presented. The advantages and disadvantages of new methods for TBC deposition are briefly described. After measurement of the thermal conductivity and thermal expansion coefficient, it is required to ascertain that such materials do not interact with the thermally grown aluminum oxide and then to determine their strength, fracture toughness, hardness, and Young’s modulus. The thermal conductivity of TBC can be reduced by increasing its porosity and suppressing its sintering. The need for and drawbacks of multilayer coatings are shown. If TBC meets all the requirements, then TBC corrosion resistance to Na2SO4, V2O5, P2O5, sand, and volcanic ash in operation and ways to protect TBC against damage need to be determined. The prospects and areas for development of these techniques are outlined.